Centralite® Red Diode Fixed Lasers

Red diode lasers have long been the standard in radiation therapy. There are three configurations for the Centralite Red Diode Lasers that address common treatment require-ments and make ordering your system fast and easy.

The optional motorized system for red diode lasers uses a handheld infrared
transmitter that enables you to make minute adjustments to the laser beam while inspecting the image at iso-center. It’s an ideal solution for hard-to-reach locations, such as an overhead laser.

Fixed lasers are equipped with mounting plates and brackets suitable for mounting the laser to a flat mount plate on a wall or installed in a ceiling. Optional Angle Brackets and Pedestal Mounts ensure you can install and use these lasers in the manner that best suits your facility.

All fixed lasers include an AC/DC converter that allows you to power the system anywhere in the world where 115/220VAC and 50/60HZ power is available.

Call JRT for pricing on these products.

03-2221 Red Diode Cross Laser $2,295.00
03-2224 Red Diode Motorized Cross Laser $3,350.00
03-2222 Red Diode Sagittal Laser $1,875.00
03-2223 Red Diode Motorized Sagittal Laser $2,795.00

03-2227 Centralite LS-1 Laser System $8,760.00
03-2228 Centralite LS-2 Laser System $6,465.00
03-2229 Centralite LS-3 Laser System $6,885.00

03-2238FL Pedestal Mounting Kit for Fixed Laser $1,300.00
03-2239FL Angle Bracket Kit for Fixed Laser $100.00

Centralite Red Diode Fixed Lasers

Centralite LS-1 Laser System Depending on the configuration of the room, the two lateral and overhead cross lasers may be mounted either vertically or horizontally. The sagittal laser mounts vertically on the back wall, allowing the beam to project downward at a 20° angle. System components include: 3 red diode cross lasers (03-2221) 1 red diode sagittal laser (03-2222) Mounting plates

Centalite Red Diode Fixed Lasers

Centralite LS-2 Laser System
The two lateral cross lasers may be mounted vertically or horizontally. The sagittal laser is mounted vertically on the back wall, allowing the beam to project downward at a 20° angle. System components include:

2 red diode cross lasers
(03-2221)
1 red diode sagittal laser
(03-2222)
Mounting plates

Centralite Red Diode Fixed Lasers

Centralite LS-3 Laser System
In this configuration, two cross lasers may be mounted vertically or horizontally on opposing walls. The third laser is mounted on the ceiling, allowing the two beams to project downward through the isocenter. System components include:

3 red diode cross lasers
(03-2221)
Mounting plates