 |
Silverman Head/Neck Supports
|
|
The Silverman Head-Neck Supports are made of a thin clear plastic material. The plastic thickness ranges between 0.03” and 0.06”. They are the same size and shape as the Timo supports and have the same letter sequence. Minimal or no skin reaction has been observed when treatments are given directly through these supports.
Silverman with 90° Corners
03-1450 Silverman, set of 6
03-1451A Silverman, Individual Size A
03-1451B Silverman, Individual Size B
03-1451C Silverman, Individual Size C
03-1451D Silverman, Individual Size D
03-1451E Silverman, Individual Size E
03-1451F Silverman, Individual Size F
Silverman with Cut Corners for
Uni-Frame Base Plate
03-1453 Silverman, Set of 6
03-1454A Silverman, Individual Sizes A
03-1454B Silverman, Individual Sizes B
03-1454C Silverman, Individual Sizes C
03-1454D Silverman, Individual Sizes D
03-1454E Silverman, Individual Sizes E
03-1454F Silverman, Individual Sizes F
|
|
|
| |
 |
TIMO Head and Neck Supports
|
|
TIMO Head and Neck Supports are made of molded polyurethane foam with a smooth durable surface. Six different heights and contours provide the versatility needed to attain the desired head angulation.
Designed to fit the average adult head,
these supports are soft enough for comfort, yet firm enough to prevent sinking after the head is
positioned. They are easily cleaned with water or alcohol and each support is lettered for easy
identification.
03-1440 TIMO, Set of 6
03-1441A TIMO, Individual Sizes A
03-1441B TIMO, Individual Sizes B
03-1441C TIMO, Individual Sizes C
03-1441D TIMO, Individual Sizes D
03-1441E TIMO, Individual Sizes E
03-1441F TIMO, Individual Sizes F
|
|
|
| |
|
|
Moldcare® Pillow
|
|
Simple to use, the MoldCare Pillow allows you to customize each head pillow for the comfort of your patient. The new single-use MoldCare pillow has higher reproducibility and comfort to get the best results in treatments. The MoldCare Pillow can be used with any Head Boards. For better reprodu-cibility, the boards have indents so the pillow will fall into the same exact spot every time.
The superior base material (polystyrene beads and hydraulic resin) sets with a small quantity of water, enabling the user to accurately mold the pillow under the patient. Since MoldCare has a low specific gravity (.01) with a CT value less than -800, the device can be used in treatment with a CT simulator. MoldCare is simple to use. Remove the MoldCare from the aluminum package and apply water with a spray bottle evenly across both sides. Then mold around the patient. Once you have your desired position, it takes about five minutes for the mold to set. Size is 20 cm x 25 cm.
03-1430 Moldcare Pillow, 20cm x 25cm
|
|
|
| |
 |
"Dog Dish" Plastic Head Immobilizers
|
|
These “Dog Dish” Immobilizers provide stable positioning of the head in the supine position. They are made of formed plastic and are disposable.
03-1460 “Dog Dish” Immobilizers, Adult, 50/box
|
|
|
| |
|
