RT Bolus Material

©JRT Associates 2008

Solid thermoplastic ivory RT Bolus Material is designed for single patient use making its cost fully reimbursable by medical insurance (using CPT code for complex compensators). When placed in hot water, the material softens and can then be molded to almost any area of the body without air pockets. Your custom-formed bolus can be used over the course of treatment, ensuring better reproducibility. RT Bolus Material has a density of 1.7 g/cm3.

RT Bolus is cost effective. First, your initial investment is less than half the price of other bolus material. Then, because your department can be reimbursed for each patient, even this cost is eliminated.

RT Bolus Material is available in sizes ranging from 3” x 9” up to 17” x 17” and in thicknesses from 3.2 mm to 9.6 mm.

04-0010 4.8 mm RT Bolus Material,
7.6 cm x 22.8 cm (3" x 9")
04-0011 6.4 mm RT Bolus material,
7.6 cm x 22.8 cm (3" x 9")
04-0012 9.6 mm RT Bolus Material,
7.6 cm x 22.8 cm (3" x 9")

04-0013 4.8 mm RT Bolus Material,
20.3 cm x 22.8 cm (8" x 9")
04-0014 6.4 mm RT Bolus Material,
20.3 cm x 22.8 cm (8" x 9")
04-0015 9.6 mm RT Bolus Material,
20.3 cm x 22.8 cm (8" x 9")     

04-0016 4.8 mm RT Bolus Material,
30.4 cm x 30.4 cm (12" x 12")
04-0017 6.4 mm RT Bolus Material,
30.4 cm x 30.4 cm (12" x 12”)
04-0018 9.6 mm RT Bolus Material,
30.4 cm x 30.4 cm (12" x 12")

04-0019 4.8 mm RT Bolus Material,
5 cm x 6.3 cm (2" x 2.5")
04-0020 6.4 mm RT Bolus Material,
5 cm x 6.3 cm (2" x 2.5")
04-0021 9.6 mm RT Bolus Material,
5 cm x 6.3 cm (2” x 2.5") 

04-0022 4.8 mm RT Bolus Material,
43.1 cm x 43.1 cm (17" x 17")
04-0023 6.4 mm RT Bolus Material,
43.1 cm x 43.1 cm (17" x 17")
04-0024 9.6 mm RT Bolus Material,
43.1 cm x 43.1 cm (17" x 17")   

04-0025 4.8 mm RT Bolus Material,
30.3 cm x 45.7cm (12" x 18")
04-0027 9.6 mm RT Bolus Material,
30.3 cm x 45.7 cm (12" x 18")