 |
Electric Drills
|
|
Drill,3/8 In Chuck,0-1200RPM,6.7A,120V Pistol Grip Drill, Chuck Size 3/8 Inch, Drill Chuck Type Keyless, No Load Speed 0-1200 RPM, Voltage 120, Current @ 120 VAC 6.7 Amps, Tool Weight 3.3 Pounds, Cord Length 8 Foot 2 Conductor, Tool Length 10.5 Inches, Includes Soft Grip Handle and Spindle Lock, With Composite Gear Case, Cut Steel Gears
01-1490 Electric Drill, 3/8"
01-1491 Hex Head Driver Socket, 5/16”, pkg. 5 01-1492 Cordless Drill, 3/8”
|
|
|
| |
 |
Drill Presses
|
|
Used for any general purpose to high volume drilling, these Drill Presses are ideal for drilling blocks and trays. The Presses have a fine grain, heavy cast iron head, base, table and column to reduce vibration and increase strength and rigidity for safe, accurate operation.
01-1493A Bench Drill Press, 10" Dayton
01-1494A Bench Drill Press, 15", Dayton
01-1495A Floor Drill Press, 15" Dayton
|
|
|
| |
 |
Soldering Iron
|
| This long, tapered 45 watt Soldering Iron, with chisel tip, is used for trimming alloy blocks.
01-1441 Soldering Iron, 45 watt
|
|
|
| |
 |
Screws and Washers
|
|
These stainless steel hex/washer screws are used to secure alloy to treatment trays. The washers are used under the screw head to prevent the tray from cracking.
01-1420 Hex/Washer Screws, SS, # 12 x 1", 100/pkg.
01-1421 Hex/Washer Screws, SS, # 12 x 1½", 100/pkg.
01-1425 Washer, Nylon, for 1/4” holes, 100/pkg.
01-1426 Washer, Nylon, for 3/8" holes, 100/pkg.
|
|
|
| |
|
|
Miscellaneous Tools
|
|
01-1450 Allen Wrenches, Set
01-1454 Drill Bit Set
01-1455 Dust Pan
01-1456 Duster Brush
01-1457 File, Half Round, w/Handle
01-1458 File, Flat Bastard, w/Handle
01-1459 File, Fine, with Handle
01-1460 File Card with Brush
01-1462 Hacksaw, 12"
01-1463 Pliers, 10”
01-1468 Rubber Mallet
01-1470 Screwdriver, Slotted Tip
01-1471 Screwdriver, Cordless
01-1472 Screwdriver, Phillips
01-1477 Utility Knife
01-1478 Vise Grip, 11” “C” Clamp
01-1479 Tool Box
|
|
|
| |
|
