Dose Calibrator Accessories

Dose Calibrator Vial Sources

Dose Calibrator Vial Sources provide a safe and convenient method of calibration and quality control of dose calibrators. Co-57, Cs-137, Co-60 and Ba-133 available separately and in sets.

Linearity Test Kits

The Calicheck and the Lineator Linearity Test Kits are simple devices accurately and reliably verifies the linearity of your dose calibrator in less than 10 minutes.

Vial/Syringe Dippers and Well Inserts

The rugged Curved Style Vial/Syringe Dipper is specially designed to hold syringes and vials of all sizes.

The T-Style Vial/Syringe Dipper offers a safe, convenient way to hold a vial or syringe during activity measurement.

The Dose Calibrator Chamber Well Insert is made of clear, tough Plexiglas for improved durability, reduced breakage and longer life. Fits CRC® and Atomlab Dose Calibrators.

Designed for use with I-123 and In-111, the Copper Dipper removes variation in readings caused by attenuation differences from different materials and thicknesses used in syringes and vials.

The BEXXAR Syringe Dipper will hold a 60 cc syringe in the correct position in most commercial dose calibrators.

Chamber Shielding

The Environmental Shield for CRC® Dose Calibrators consists of 1½” interlocking lead rings that surround the CRC® remote ionization chamber to provide additional shielding in high background areas.

Constructed of thick lead shielding rings, these Positron Shields give maximum radiation protection when working with 511 KeV nuclides.

CRC® Dose Calibrator Printers, Tickets
and Labels

The CRC® Ticket Printer and CRC® Roll Printer can be used with the CRC-15 family of Dose Calibrators, the CAPRAC Wipe Test Counters and the BETA-C Beta Counter. The CRC® Full Page Printer can be used with the CRC®-15R, CRC-15W, CRC-15 BETA and CRC-127R.

The CRP-200 Dose Tickets for the CRC Dose Calibrator Printers have peel off, self-stick labels and are easily separated after printing.

Chamber Mounting Flange

The Mounting Flange allows the CRC® ionization chamber to be mounted in a cabinet or fume hood (flush with the surface of the counter top), saving valuable countertop space and allowing for additional “under counter” shielding.

7310-2307 Mounting Flange for CRC Dose Calibrators $370.00

Dose Calibrator Console Wall Shelf

The Dose Calibrator Console Wall Shelf (for
CRC-15 and Atomlab Dose Calibrator consoles) increases your work area when counter space is at a premium. It can also rest on your countertop to provide optimal viewing.

11-WMC Console Wall Shelf $145.00