Fluoroscopic QC Test Tools

RAD-CHECK® Micro-R

The RAD-CHECK® Micro-R electrometer is designed for measuring dose and rate under high and low dose rate conditions. It is excellent for cardiac cath and fluoroscopy and the perfect choice for tight budgets.

A variety of other instruments are available for measuring fluoroscopic output. See Radiographic/ Mammographic/ Fluoroscopic Test Instrumentation

Radiographic/Fluoroscopic Test Kits

The Radiographic/Fluoroscopic Test Kit 184D contains the necessary test instruments for doing routine quality control tests of radiographic, fluoroscopic and tomographic x-ray units.

Fluoroscopic Phantoms

Ensure the optimum performance of your Fluoroscopic System with a wide variety of Fluoroscopic Phantoms.

Patient Phantom/Penetrometer System

To check the tabletop output of image intensified fluoroscopic equipment properly, a simulated body or phantom should be placed between the x-ray output meter and the input phosphor. The Patient Phantom/Penetrometer System protects the phosphor from the direct beam and provides the simulated attenuation needed to check the performance of image-intensifier systems.

Fluoroscopic Beam Alignment Device

If corrective measures are required for misaligned fluoroscopic image intensifier systems, the Fluoroscopic Beam Alignment Device will provide a measurement of optimum beam alignment.

Fluoroscopic System Resolution Test Tools

The Fluoroscopic System Resolution Test Tools are excellent for resolution checks of fluoroscopic imaging systems. These 7.5” square plastic plates each have a 7 inch square area containing eight groups of copper or brass mesh screening

Fluoro-Test™ Resolution Tool

The Fluoro-Test Resolution Tool is a fluoroscopic contrast resolution device that is designed to yield a quantitative assessment of fluoroscopic threshold contrast.